White Cement Based Polymeric texture BuildWell Texture is a cement based Polymeric textured wall finish. It decorates the wall as well as protect both interior and exterior wall. It is more economical than other acrylic based products. Its unique pattern has distinctive appeal. Its special formulation keeps it safe against the ill-effects of the weather. It contains finest quality minerals, white cement and polymers.Request a quote
- Other Details
- Hides cracks: It hides crack in surface undulation and refines surface cracks.
- Tough textured: Its tough textured finish lasts long and ensures low maintenance.
- Protection of plasters: It protects the plastered wall from heavy rain and wind.
- It has excellent UV resistance.
- Good workability and high durability.
- It is highly compatible with plaster and concrete wall surface.
- It has excellent resistance against the growth of algae and fungi on the wall.
- Provides best value for money.
Remove all the loose adhering particles, growth of fungus, algae from the wall surface by wire brush and potable water. For loose plaster areas, remove the defective material and re-plaster the area with BuildWell Ready-Mix Plaster. Fill up any cracks in base plaster by using HomeSure Crack Filler.
Take about 150-200 ml of water for 1 kg of BuildWell Texture in a clean bucket. Mix BuildWell Texture to water and not water to BuildWell Texture. Stir continuously by using an electric mixer or by hand to obtain a homogeneous lump-free paste. Allow the resultant paste to stand for about 5 - 10 minutes for the additives to dissolve. Re-mix again for about 2 minutes. The mixture is now ready. Once the mixture is ready for use, use the mixture within 30 min.
Dampen the surface to be plastered with clean water. Allow excess water to drain off. Once the surface is clean apply the material with putty blade or any other suitable trowel on the prepared plastered surface. Allow to dry the surface for 5-10 min. Apply in patches and with the help of plastic/fiber trowel and move uniformly on the surface to get the desired texture pattern and uniform leveling.
The surface on which the material needs to be applied should be plain and leveled. BuildWell Texture should not be applied to surfaces which are subjected to continuous dampness. Recommended: Use the material mix within 2 hours of adding water.
Exterior and Interior walls for residential house or buildings, commercial office/Malls or buildings, farmhouses, outhouses, bungalows, resorts, College and school. Institute buildings, Government premises buildings areas. Suitable for all types of exterior and interior walls to make them look more entertaining, interesting and appealing.
BuildWell Texture is cement based polymeric textured and its alkaline in nature, hence it’s strictly advisable to avoid direct eye and skin contact with it. In case of an eye contact flush your eyes with clean water at least for 15 mins and seek medical help if irritation develops or persist. (Highly Advisable) to keep it out of reach of children.
BuildWell Texture is available in 30 kg bag and has a shelf life of 6 months, if stored in cool and dry location. As temperature, humidity, water addition and other parameters vary from site to site, the above information should be treated as a general guideline. Please Note: While opening or using the BuildWell Texture bag we recommend you to wear an eye protection (Glasses), Impervious Gloves and Protective Clothing.
BuildWell Texture coverage is approx. 4 Sq.Ft/ per kg with a thickness of 2 to 2.5 mm.
|Physical state||Ready to use dry mix powder|
|Appearance||White to pale cream|
|Pot life||30 Min|
|Dry to touch @ 30Deg.||0-1 Hrs. @ 30Deg.|
|Tack free@ 30Deg.||Max 8 Hrs.|