Toll Free: 1800 3000 6650
Cure Coat
HomeSure w-shield Cure Coat
HomeSure w-Shield Cure Coat is a resin based, quick drying liquid that forms a transparent, non-yellowing film to retain moisture in concrete, ensuring proper hydration and strength development. Ideal for both interior and exterior concrete applications, it helps prevent shrinkage cracks and surface defects while enhancing durability. Suitable for use in various environmental conditions, this cost-effective solution is commonly applied on slabs, pavements, and other concrete surfaces to promote optimal curing and long-lasting results.
Features and Benefits
- Moisture Retention: Retains moisture in the concrete to prevent premature drying.
- Non-Yellowing Film: Provides a clear, transparent finish that will not discolour over time.
- Quick Drying: Dries quickly to a tough film, allowing for faster project completion.
- Ease of Application: Can be applied with a sprayer, roller, or brush.
SKUs: 1 Kg, 5 Kg, 10 Kg, 20 Kg, 50 Kg & 200 Kg
Benefits
- Ready-to-use with no mixing or heating required, reducing labour and application time.
- Forms a seamless, durable waterproofing barrier.
- Superior resistance to peeling, chipping, and premature degradation.
- High resistance to oxidation, UV exposure, and ozone.
- Flexible enough to accommodate structural movements and thermal expansion/contraction.
Technical Data
Application Procedure
Technical Data
| Parameters | Specifications |
| Nature | White colour liquid |
| Composition | Resin based co-polymer & additives |
| Specific gravity @ 27°C | 0.95 ± 0.10 |
| Coverage* | 4 – 6 m²/kg |
| Thinning | Not recommended |
| Water retentivity (ASTM C309) | < 0.55 kg/m² |
| Compliance to ASTM C309 | Type-1; Class-B |
Application Procedure
- Ensure the surface is free of standing water before applying.
- First, test in a small patch area to ensure the surface smoothness is not disturbed by the application before applying to the entire surface.
- Apply Walplast Curing Compound immediately after finishing and levelling the concrete surface.
- Use a sprayer, roller, or brush for even coverage.
- Allow the curing film to remain on the surface until the concrete has reached the desired strength.
Note: HomeSure w-Shield Cure Coat system must be applied between temperature 10 – 350 C.
FAQs
Ans: Yes, it reduces the need for frequent repairs, guards against harm to interior decoration, guards the building against water seepage damage and prevents health problem brought on by indoor humidity
Ans: Using waterproof materials, a process called Roof Water Insulation process is designed to apply on roofs of buildings
Ans: 12 months from the date of manufacturing when stored in unopened, original sealed & dry condition at a temperature range from 10- 40 degrees.
Ans:
- To avoid any type of water leaks
- To increase the building’s resilience
- To reduce recurring costs for waterproofing-related issues
- To experience mental calm
