Toll Free: 1800 3000 6650
NOVA Board Grip
NOVA BoardGrip
NOVA Board Grip is a multi-purpose gypsum-based plasterboard adhesive, designed for direct bonding of plasterboards and insulated laminates to a wide range of wall substrates.
Features & Benefits
- Easy to use—simple mixing and application
- Strong and reliable bond strength
- Long working time (up to 90 minutes) for flexible installation
- 3-hour drying time supports faster progress
- Corrects uneven walls; suitable for blockwork concrete, and masonry.
- Fixes a wide range of plasterboards, insulated laminates, and panels
- Reliable Workability for consistent results
- Moisture-resistant and durable
- Cost-effective with high coverage and minimal waste
Benefits
- High value utilization
- Excellent strength after drying
- Direct and easy application
- Great bonding
- Light weight
Technical Data
Applications
Technical Data
| Parameters | Specifications |
| Thickness of Dabs | Minimum 25 mm |
| Working time | 90 minutes |
| Drying time | 3 hours |
| Water required | 12.0 to 13.0 litres per 25 kg bag |
| Reaction to fire | Class A1 |
| Bond strength | ≥ 0.06 MPa |
| Shelf life | 12 months (if stored correctly) |
| COMPLIANCE and QUALITY |
| CE marked |
| Conforms to EN 14496:2017 |
| AVCP System 4 |
| Manufactured under an ISO 9001:2015 certified quality management system |
| For performance details, refer to the Declaration of Performance (DoP) |
Applications
SUITABLE SUBSTRATES
- Plasterboard (for laminated partitions)
- Clay brickwork
- Concrete blockwork
- No-fines concrete
SUBSTRATE PREPARATION
- Substrates must be clean, dry, and structurally sound
- Remove loose dust, grease, and contaminants
- High- or low-suction substrates may require priming
MIXING INSTRUCTIONS
- For NOVA BoardGrip, use a mix ratio of 2 parts powder to 1 part water (per 25 kg bag)
- Gradually add powder to 12–13 litres of clean, cold water using clean mixing equipment
- Allow the mixture to soak for 1–2 minutes
- Mix gently by hand or with a low-speed mechanical mixer until smooth and lump-free
- Avoid over-mixing, as this may reduce workability and bonding performance
APPLICATION
- Apply adhesive in dabs 50–75 mm wide, and approx. 250 mm long
- Space vertical rows approx. 300 mm apart
- Minimum dab thickness: 25 mm
- Apply horizontal dabs at floor and ceiling junctions to support board edges and reduce air gaps
- Position plasterboard or panels and tap into alignment
- Product workable time: up to 90 minutes
STORAGE
- The product should be stored in a cool, dry place and should be used within 12 months of the date of manufacture
USAGE PRECAUTIONS
- Do not apply on frozen surfaces
- Protect freshly applied plaster from rapid drying in hot or windy conditions
- Do not expose the set plaster to temperatures above 49°C
- In hot or dry climates, protect from rapid water loss
- Keep out of reach of children
